|
|
|
 |
Castle Creations Phoenix-85 High Voltage ESC PHXHV85
|
Manufacturer:
N/A
| | SKU: |
PHXHV85
|
Price: $179.99
Retail: $179.99
You Save: $0.00 (0%)
|
Castle Creations Phoenix-85 High Voltage ESC Brushless
This is the Castle Creations PHOENIX-85 High Voltage Electronic Speed Control.
For use with Brushless motors only.
Features:
Extremely Low Resistance (.0015 Ohms)
High rate adjustable switching
Up to 85A max continuous current
Dual Opto-Coupled (No BEC)
Up to 36 cells or 12s Lithium Polymer - Maximum
16 cells or 3s Lithium Polymer - Minimum
10AWG wiring for motor and battery leads
Aluminum heatsinks (anodized green)
Dynamic braking ensures folding props fold promptly
Runs motor in forward OR reverse
Overtemp Motor Cutoff with Reset
Safe "Power On" arming program ensures motor will not accidentally turn ON
Low torque "soft start" prevents damage to fragile gearboxes
Auto Shut Down when signal is lost or because radio interference
User Programmable Features:
Low-voltage cutoff with Auto-LiPo detect as default.
Over-current Protection
Brake Type
Throttle Range - fixed/self-adjusting/governor
Timing Advance
Cutoff Type
Soft Start ramp up
Switching Frequency
Includes:
One PHOENIX-85 High Voltage speed control w/Universal connector.
One set of instructions.
One small "Castle Creations" decal.
Requires:
Bullet-type motor connectors.
Battery Connectors - depends which connector is used on battery.
Specifications:
Speed control body length: 2.8" (71mm)
Speed control body width: 1.6" (41mm)
Speed control body thickness: 0.9" (23mm)
Motor wire lead length: 5.0" (127mm)
Battery wire lead length: 7.0" (178mm)
Servo wire lead length: 12" (305mm)
Continuous current: 85A
Up to 36 cells or 12s Lithium Polymer: Maximum
16 cells or 3s Lithium Polymer: Minimum
Wire size for motor and battery leads: 10AWG
Comments:
This speed control does NOT feature BEC. You must use an alternate power source for your receiver and servos.
E-mail a friend about this item.
Return to Catalog
|
Sign In
